MAHA AUTOMATION

CSK Phillips head self-tapping screws (DIN 7982): High strength and durable fasteners used for sheet metal applications.

Split pin (ISO 1234) has its flat inner surfaces touching for most of its length so that it appears to be a split cylinder.

A POP Rivet is a blind fastener which can be inserted and set from one side of the work piece.

Pan Phillips Screw (ISO 7045) is made using best quality stainless steel that is procured from the authentic sources of the market.

CSK Phillips head screws (ISO 7046-1): Used for the assembly of machine and electrical components.

Cheese Head Screws (DIN 84): have a disc with a cylindrical outer edge, height approximately half the head diameter, and a flat bearing surf

ROUND HEAD SCREW (DIN BS 450): Have a zinc plating for corrosion resistance in wet environments. Length is measured from under the head.

Eye Bolt : Heavy forged eye bolts with a continuous eye may be forged with an integral shoulder, allowing their use for heavy off-axis loads

A square nut (DIN 557): Have a greater surface in contact with the part being fastened, and therefore provide greater resistance to loosenin

Flange button Head : Are protective fasteners which provide the assembly with structural support as well as a visually appealing look.

Hex nuts (DIN 934): Supplied in both plain and zinc finishes and are used with anchors, bolts, screws, studs, threaded rods.

Wedge anchors (DIN 9021): Threaded, torque-controlled, carbon steel or stainless steel wedge expansion anchor .

Nyloc nut (DIN 985): Nuts with a nylon locking ring inserted

We are engaged in proffering Weld Stud that is available in different specifications. The offered product finds a major application in stud

It is a fastener used to secure a head to the mating material and assure high torque resistance.

Clinch nut is threaded fastener secured by a press fit into one of the pieces to be joined.

Flange Bolt DIN 6921: A one-piece hex washer head bolt with a flat bearing surface, made of medium carbon or high-alloy Steel.

Button Head ISO 7380-1:Specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16,

Allen CSK ISO 7991: Not intended for high strength application.

Allen Cap DIN 912: Have cylindrical heads and are tightened using a hexagon wrench.